Specifications
plastic welder
we are original manufacturer of Lesite
for pe pp pvc eva
overlap10/12/15/20cm avaliable
membrane wedge welder
LST800D plastic welder is small, light, high welding efficient.
This hot wedge welder is available for welding HDPE, LDPE ,EVA ,PVC, ECB, PP and other hot melt materials.
1. Basic Parameter
Voltage: | 220V |
Frequency: | 50/60Hz |
Power: | 800W |
Welding speed: | 0.5-5m/min |
Heating temperature: | 0-450°C |
Thickness of material: | 0.2mm-1.5mm |
Overlap width: | 10cm |
Welding width: | 12.5mm×2, interior cavity 12mm |
Seam strength: | ≥85% base material (tensile resistant in shear direction) |
Weight: | 5kgs |
Insulation class: | class II |
usage | plastic welder |
2. Details for products
1). plastic welder for welding PE, PP, PVC, EVA.ECB and other hot melt geomembranes
2). plastic welder's controller: the Power ON/OFF, Temperature control knob, Speed control knob
3).The motor housing of plastic welder
4).The protective fuzes side of plastic welder
5)The pressure control button of plastic welder is under the power ON/OFF button
6).Operation principle:
Motor drives upper and lower pressure rollers to rotate through reduction gearbox and chain.
Slide carriages drive the hot wedge and insert it between the two base materials, at the same
time lever presses pressure rollers and engages the two fused base materials.
3. Spare Parts
The spare parts of 800w hot wedge welder , you could choose to order according to your needs.
4. Packaging
Package:aluminium box inner and carton box outer
Size:37*22.5*28 cm
Weight of package:8.5kgs
Application
1.railway/ highway subway tunnel waterproof construction
2.water conservancy projects
3.farming:shrimp pood
4..refuse landfill
5.chemical,mining sewage treatment
6.roof waterproofing projects